How to Remove the Door Lock from Bentley GT GTC Continental Flying Spur
Step 1. There are only two tools you will need to pull the lock off of the Door trim and panel puller. Is a t20 torx.
Step 2. Open door and on the inside of the door, parallel of the lock, you will find two plastic stud covers.Remove those two stud covers with the door trim puller and reveal the to screws on the inside.
Step 3.Take your t20 torch and remove the top screw all the way out from the door.The bottom screw has a retainer, so you will only loosen this screw till the screw will not go any further.
Step 4. Gently try to pull the lock out with your hand, while holding the door lever with you other hand.(If the lock does not want to come out, you can use the factory key to put in the lock and use as leverage to wiggle out the key gently.
